:::Thermal Shock Tester:::

Select Products:

News

Empty

Thermal Shock Tester

Triple trough Cold/heat testing machine is used in testing a fixed material in the condition of immediately changing of high and low temperature would rather cause the bad effect of the product or not. It is usually used on electronic parts, vehicle parts and hi-tech parts... etc. Those need severe environment condition test and highly trusty requires testing.

Specifications: TBST - A 1

★Specifications and design characteristics are subject to change without notice.

Model	A1	B1	C1	A2	B2	C2
Inside dimensions	35×40×35	50×40×40	60×45×40	35×40×35	50×40×40	60×45×40
Outside dimensions	152×155×195	185×155×200	190×160×200	152×155×195	185×155×200	190×160×200
Loading weight	2kg	5kg	10kg	2kg	5kg	10kg
High temp range	80 ~ 150°C			80~150°C
Cold temp range	0 ~ -45°C			0 ~ -55°C
Pre temp range	80~200°C; 0 ~ -55°C			80~200°C; 0 ~ -65°C
Preheat time	About 25 min
Pre cold time	About 70 min
Temp keep up time	High temp.25 min; Low temp. 25 min (Could customize)
Recover time	5 min (Could customize)
Temp. constancy	±2°C
Power consumption	AC 3Ø; 220/380V; 50/60Hz

Model	A3	B3	C3
Inside dimensions	35×40×35	50×40×40	60×45×40
Outside dimensions	152×155×195	185×155×200	190×160×200
Loading weight	2kg	5kg	10kg
High temp range	80 ~ 150°C
Cold temp range	0 ~ -65°C
Pre temp range	80 ~ 200°C; 0 ~ -70°C
Preheat time	About 25 min
Pre cold time	About 70 min
Temp keep up time	High temp.25 min; Low temp. 25 min (Could customize)
Recover time	5 min (Could customize)
Temp. constancy	±2°C
Power consumption	AC 3Ø; 220/380V; 50/60Hz

visitor.